Superior Steel Overseas
Girgaon, Mumbai, Maharashtra
GST No. 27ABOFS2693A1ZZ
08048077606 88% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Alloy Steel Seamless Pipe
We are looking for enquires from International Markets like Singapore, Malaysia, Indonasia, Vietnam, Australia, Germany, Netherlands, Italy, Holland, Croatia, Kazakhastan, Texas (USA) and All Gulf countries like: Saudi, Oman, Qatar, Kuwait, Bahrain, UAE.
| Shape | Square, Round, Rectangular |
| Surface Finish | Finished Polished, Brushed |
| Steel Grade | ASTM A240 |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Material | Alloy Steel |
| Application | Chemical Handling,Food Products,Gas Handling,Drinking Water,Utilities Water |
| Thickness (mm) | 8 mm - 50 mm |
| Unit Length | 6m, 3m, 12m |
| Nominal Size | 1 inch, 3/4 inch, >3 inch, 1/2 inch |
| Technique | Hot rolled,Cold drawn,ERW,SAW |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A 335 Gr. P11 Seamless Pipe. Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree celcius,
Delivery Condition:
| Unit Length | 24m |
| Material Grade | SS316 |
| Surface Finish | Anodized, Finished Polished |
| Thickness (Millimetre) | SCH 40 TO SCH XXS & Higher |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Shape | Round |
| Size | 1/4 inch NB TO 28 inch NB |
| Material | Stainless Steel,Nickel Alloy,Carbon Steel |
| EFSW | 16 inch NB - 54 inch NB |
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Sizes:-
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183, NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50-degree Celcius,
Delivery Condition:
| Shape | Round |
| Surface Finish | Brushed, Finished Polished |
| Material | Alloy Steel |
| Thickness | 8 mm - 50 mm |
| Seamless | 1/4 NB - 28 NB |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
| EFSW | 16 NB - 54 NB |
| Grade | ASTM A 213 - T-11,T-12,T-22,T-5,T-9 Etc. |
| Length | Standard length,Double length & In Cut length also |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ ASME A 335 Gr. P2 Seamless Pipe. Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree celcius,
Delivery Condition:
*Your information is safe with us.
| Size | 4 inch,>4 |
| Length | 6m, 30m, etc, 3m |
| Material Grade | SS316 |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Material | Alloy Steel |
| Application | Chemical Handling,Food Products,Gas Handling,Drinking Water,Utilities Water |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM / ASME A 335 Gr. P1 Seamless Pipe.Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
| Shape | Square, Round |
| Size | 1/2 inch, >4, 2 inch, 3 inch |
| Material Grade | ASTM A240 |
| Surface Treatment | Polished, Galvanized |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Material | Alloy Steel |
| Application | Chemical Handling,Food Products,Gas Handling,Drinking Water,Utilities Water |
| Surface Finish | Finished Polished, Brushed |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
| EFSW | 16 NB - 54 NB |
| Grade | ASTM A 213 - T-11, T-12, T-22, T-5, T-9 Etc. |
| Technique | Hot rolled,Cold drawn,ERW,SAW |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A 335 Gr. P23 Seamless Pipe. Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree Celsius,
Delivery Condition:
| Unit Length | 24m, 12 m, 6 m, 18 m |
| Material Grade | SS316 |
| Surface Finish | Anodized, Finished Polished |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Material | Alloy Steel |
| Shape | Round |
| Application | Chemical Handling,Food Products,Gas Handling,Drinking Water,Utilities Water |
| Size | 1/2 inch, 4 inch, >4, 3 inch |
| Thickness (mm) | SCH 40 TO SCH XXS & Highter |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A 335 Gr. P36 Class 1 Seamless Pipe.Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree Celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
Delivery Condition :
*Your information is safe with us.
| Shape | Round |
| Size | 4 inch, 1/2 inch, 1 inch, 3 inch, >4 |
| Material Grade | SS316 |
| Unit Length | 24m, 12 m, 6 m |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Material | Alloy Steel |
| Surface Finish | Anodized |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM /ASME A 335 Gr. P911 Seamless Pipe.Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details.Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (xray),bead crush
DELIVERY CONDITION:
| Length | 100m, 30m, 6m |
| Steel Grade | SS316L |
| Material Grade | ASTM A240 |
| Surface Finish | Finished Polished, Brushed |
| Surface Treatment | Galvanized |
| Pipe Fluid | Gas, Water, Chemical |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Color | Silver |
| Material | Alloy Steel |
| Size | 1/2 inch, >4, 1 inch |
| Nominal Size | 2 inch, 3 inch, 1/2 inch |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A 335 Gr. P122 Seamless Pipe.Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183, NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degrees Celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
Delivery Condition:
| Thickness (Millimetre) | 8 mm - 50 mm |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Material | Alloy Steel |
| Thickness (mm) | SCH 40 TO SCH XXS & Highter |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
| Electric Resistance Welded | 1/2 NB - 30 NB |
| Coating | 3 Layer polyethylene, 3 Layer polypropylene |
| Length | Standard length, Double length & In Cut length also |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM /ASME A 335 Gr. P5 Seamless Pipe. Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree celcius,
Delivery Condition:
*Your information is safe with us.
| Unit Length | 18 m, 24m, 12 m |
| Material Grade | SS316 |
| Surface Finish | Finished Polished, Anodized |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Shape | Round |
| Size | >4, 1/2 inch, 3 inch, 4 inch |
| Material | Alloy Steel |
| Grade | ASTM A 213 - T-11, T-12, T-22, T-5, T-9 Etc. |
| Electric Resistance Welded | 1/2 NB - 30 NB |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM /ASME A 335 Gr. P9 Seamless Pipe.
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details.
Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183, NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degrees Celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
DELIVERY CONDITION:
Assrolled/annealed/normalized
Stress relieved /quenched & tempered
| Shape | Round |
| Size | 1/4 inch NB - 28 inch NB |
| Steel Grade | ASTM A240 |
| Material | Alloy Steel |
| ERW | 0.5 inch NB - 30 inch NB |
| HSAW | 8 inch NB - 100 inch NB |
| Thickness | SCH 40 TO SCH XXS & Higher |
| Type | Seamless |
| Coating | 3 Layer polyethylene, 3 Layer polypropylene |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A 335 Gr. P12 Seamless Pipe Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Sizes:-
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree Celsius,
Delivery Condition:
Assrolled/annealed/normalized
Stress relived /quenched & tempered
| Unit Length | 12 m, 24m |
| Material Grade | SS316 |
| Surface Finish | Finished Polished, Anodized |
| Pipe Fluid | Chemical, Gas |
| Size | >4 |
| HSAW | 8 NB - 100 NB |
| EFSW | 16 NB - 54 NB |
| Seamless | 1/4 NB - 28 NB |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A213 Gr. T11 Seamless Pipe.
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree Celsius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
Delivery Condition:
Assrolled/annealed/normalized
Stress relieved /quenched & tempered
*Your information is safe with us.
| Shape | Round |
| Size | 3 inch, 1/2 inch |
| Material Grade | SS316L, ASTM A240 |
| Unit Length | 12 m, 24m, 6 m |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Surface Finish | Anodized, Finished Polished |
| Material | Nickel Alloy |
| Outer Diameter | 10 - 1200 mm |
| Technique | Hot rolled,Cold drawn,ERW,SAW |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A213 Gr. T12 Seamless Pipe.
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using the optimum quality material as per their specified details.
Moreover, we keep in mind the universally set quality standards while manufacturing these seamless Pipes\
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree Celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
Delivery Condition:
Assrolled/annealed/normalized
Stress relieved /quenched & tempered
| Shape | Round |
| Size | 1/2 inch, 4 inch, >4, 3 inch |
| Material Grade | SS316L |
| Unit Length | 12 m, 6 m, 18 m, 24m |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Surface Finish | Finished Polished, Anodized |
| Seamless | 1/4 NB - 28 NB |
| Coating | 3 Layer polyethylene, 3 Layer polypropylene |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM A213 Gr. T12 Seamless Pipe.
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details.
Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183, NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50-degree Celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
Delivery Condition:
Asrolled/annealed/normalized
Stress relived /quenched & tempered
| Shape | Round |
| Size | >4, 4 inch, 3 inch, 1/2 inch |
| Steel Grade | ASTM A240 |
| Material Grade | SS316 |
| Unit Length | 24m, 12 m, 18 m |
| Surface Treatment | Polished |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Types | Round |
| Color | Silver |
| Material | Alloy Steel |
| Surface Finish | Anodized, Finished Polished |
Alloy Steel ASTM/ASME A213 Gr. T5 Seamless Pipe. Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using the optimum quality material as per their specified details.
Moreover, we keep in mind the universally set quality standards while manufacturing these seamless pipes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
DELIVERY CONDITION:
Assrolled/annealed/normalized
Stress relieved /quenched & tempered
*Your information is safe with us.
| Shape | Round |
| Size | >4, 4 inch, 3 inch, 1/2 inch |
| Material Grade | SS316 |
| Unit Length | 12 m, 24m, 18 m |
| Thickness (Millimetre) | 8 mm - 50 mm |
| Pipe Fluid | Chemical, Water, Gas |
| Surface Finish | Anodized, Finished Polished |
| Material | Galvanized Iron |
| Nominal Size | 2'', 1/2'', 3/4'', 1'' |
| Application | Chemical Fertilizer Pipe |
| Technique | Hot Rolled |
| Usage | Oil Gas Sewage Transport |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A213 Gr. T9 Seamless Pipe.
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using an optimum quality material as per their specified details.
Moreover, we keep in mind the universally set quality standards while manufacturing these seamless pipes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183, NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50-degree Celcius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
Delivery Condition:
Assrolled/annealed/normalized
Stress relieved /quenched & tempered
| Unit Length | 24m, 18 m, 12 m, 6 m |
| Material Grade | SS316L |
| Surface Finish | Finished Polished, Anodized |
| Diameter (Millimetre) | 14 - 720 mm |
| Shape | Round |
| Size | 3 inch, >4, 4 inch, 1/2 inch |
| Technique | Hot rolled,Cold drawn,ERW,SAW |
| Thickness | 2 - 120 mm |
| Length | 5-10 m |
| Material | Alloy Steel |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM/ASME A213 Gr. T22 Seamless Pipe.
Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details.
Moreover, we keep in mind the universally set quality standards while manufacturing these seamless pipes.
Sizes:-
Seamless -1/4’’NB TO 28’’NB
Thickness- SCH 40 TO SCH XXS & Higher
ERW / HFW - ½’’ NB TO 30’’NB
HSAW - 8’’NB TO 100’’ NB
EFSW - 16’’ NB TO 54’’ NB (8MM TO 50MMTHK)
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183, NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50-degree Celsius,
3 Layer polyethylene coating
3 Layer polypropylene coating,
Radiography (x-ray),bead crush
DELIVERY CONDITION:
Assrolled/annealed/normalized
Stress relived /quenched & tempered
| Length | Standard length |
| Thickness (Millimetre) | SCH 40 TO SCH XXS & Highter |
| Seamless (Inch NB) | 1/4 NB - 28 NB |
| Types | Round |
| Material | Alloy Steel |
| Thickness (mm) | 8 mm - 50 mm |
| Helical Submerged Arc Weld | 8 NB - 10 NB |
| Electric Resistance Welded | 1/2 NB - 30 NB |
| Coating | 3 Layer polyethylene, 3 Layer polypropylene |
| Grade | ASTM A 213 - T-11, T-12, T-22, T-5, T-9 Etc. |
Leveraging on the support of experienced professionals, we are engaged in offering fine grade Alloy Steel ASTM /ASME A213 Gr. T91 Seamless Pipe. Our seamless pipes are able to fulfill the requirements of customers to ensure the same, we manufacture these using optimum quality material as per their specified details. Moreover, we keep in mind the universally set quality standards while manufacturing these seamless tubes.
Supplementary Requirement:-
NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, SOURCE SERVICE, HIC, SSC Tested, impact test at 50 degree celcius,
Delivery Condition:
*Your information is safe with us.
| Surface Finish | Finished Polished, Anodized |
| Application | Auto Industrial, Chemical Industry etc |
| Thickness (mm) | 0.10 - 80 mm |
| Standard | ASTM A268 TP 405 ASTM A268 TP 410 ASTM A268 TP 429 ASTM A268 TP 430 ASTM A268 TP 443ASTM etc |
| Finish | Pickled or bright finish |
| Packing | Bundles etc |
| Grade | 446, 201, 304, 316, 316Ti, 347, 2205, |
| Type | Seamless |
| Technology | Cold drawn |