Mumbai, Maharashtra
GST No. 27ABOFS2693A1ZZ
Call 08048966665 100% Response Rate
Product Brochure
Thickness | 0.1 mm to 200 mm |
Material | Stainless Steel,Nickel Alloy,Carbon Steel |
Surface | Rust Coated |
Technique | Hot Rolled |
Type | Steel Plate |
Elongation | 22 % |
Tensile strength | 440 - 570 MPA |
Standard | AISI, ASTM, BS, DIN, GB, JIS, ar500 high strength abrasion resistant steel plates |
View Complete details
Product Brochure
Elongation | 27 % |
Brinell hardness | Upto 200 HB |
Yield strength | 220 MPA |
Resistance | 392 Ohm |
Type | Nickel Plate, Alloy Steel plate |
Packing | Standard export packing,strong woden box,woven cloth |
Application | Heat-treating equipment,chemical and petrochemical processing |
Grade | Inconel ,alloy,Hastalloy, Hastelloy |
ASTM B443 covers the requirements for nickel alloy plates in various dimensions, including thickness, width, and length. These plates are primarily used in high-temperature and corrosive environments, such as chemical processing, aerospace, marine, and nuclear applications.
The standard specifies the chemical composition, mechanical properties, heat treatment, and other requirements for manufacturing nickel alloy plates. It also includes guidelines for testing methods, such as tension testing, hardness testing, and nondestructive examination.
Inconel 625 alloy offers excellent corrosion resistance, high strength, and good fabricability, making it suitable for a wide range of applications where resistance to pitting, crevice corrosion, and intergranular attack is required.
If you are considering using nickel alloy plates, specifically Inconel 625, for a particular application, I recommend referring to the ASTM B443 specification for detailed information. This will ensure that the plates meet the necessary requirements for your intended use.
View Complete details
Product Brochure
Material | Stainless,SteelNickel Alloy,Carbon Steel |
Standard | ASTM B409 ALLOY N08120 ASTM B409 ALLOY N08890 ASTM B409 ALLOY N08800 ASTM B409 ALLOY N08810 |
Elongation | 30 % |
Ultimate Strength | 350 - 620 MPA |
Grade | ASTM B409 Plates |
Application | Medical , Chemical Industry etc |
Technology | Hot Rolling |
Type | Sheet ,Plate |
Thickness | Greater than 6 mm |
Width | Greater than 1200 mm |
ASTM B409 is a standard specification issued by ASTM International that covers nickel-iron-chromium alloy plates. This specification specifically pertains to plates made from nickel-iron-chromium alloys, such as Alloy 800 (Incoloy 800) and Alloy 800H (Incoloy 800H).
Here are some key features and requirements of ASTM B409 nickel-iron-chromium alloy plates:
Material: ASTM B409 covers plates made from nickel-iron-chromium alloys, primarily Alloy 800 and Alloy 800H. These alloys are known for their excellent resistance to high-temperature corrosion and oxidation, as well as good strength and creep resistance.
Manufacturing Process: Nickel-iron-chromium alloy plates covered by ASTM B409 can be produced using various manufacturing methods, including hot or cold rolling, annealing, and other forming operations. The plates are typically supplied in the annealed condition.
Dimensions: ASTM B409 specifies the dimensions and tolerances for nickel-iron-chromium alloy plates. This includes requirements for thickness, width, length, flatness, and other dimensional characteristics to ensure compliance with the specified standards.
Mechanical Properties: ASTM B409 provides guidelines for the mechanical properties of nickel-iron-chromium alloy plates. These properties include tensile strength, yield strength, elongation, and hardness. The mechanical properties may vary depending on the specific alloy, heat treatment, and thickness of the plate.
Testing and Certification: ASTM B409 requires certain tests to be performed on the nickel-iron-chromium alloy plates to ensure their quality and conformance to the standard. These tests may include chemical analysis, mechanical testing, and non-destructive testing. The plates should be certified by the manufacturer to demonstrate compliance with the specified requirements.
It's important to note that ASTM B409 specifically focuses on nickel-iron-chromium alloy plates and does not cover other types of nickel alloys. If you have specific requirements for other nickel alloys or different specifications, it is advisable to consult relevant ASTM standards or consult with manufacturers or suppliers who can provide further guidance based on your specific needs.
View Complete details
Product Brochure
Thickness | 0.2 mm -200 mm |
Material | Aluminum Alloy |
Surface Treatment | Coated |
Application | Chemical field and petrefaction field |
Temper | T3 - T8 |
Standard | ASTMB162 |
Grade | Ni 200/Ni201 |
Technics | Forged |
ASTM B688 is the standard specification established by the American Society for Testing and Materials (ASTM) for plate and sheet materials made from nickel-chromium-molybdenum-iron alloy (UNS N08367), commonly known as Alloy 6B.
ASTM B688 covers the requirements for nickel alloy plates and sheets in various dimensions, including thickness, width, and length. Alloy 6B is a cobalt-based alloy with excellent wear resistance, corrosion resistance, and high-temperature properties. It is commonly used in applications such as pump sleeves, bearing bushes, valve seats, and other components subjected to severe wear and corrosive environments.
The standard specifies the chemical composition, mechanical properties, heat treatment, and other requirements for manufacturing nickel alloy plates and sheets. It also includes guidelines for testing methods, such as tension testing, hardness testing, and nondestructive examination.
If you are considering using nickel alloy plates or sheets, specifically Alloy 6B, for a particular application, I recommend referring to the ASTM B688 specification for detailed information. This will ensure that the plates or sheets meet the necessary requirements for your intended use.
View Complete details
Product Brochure
Surface | Anodized |
Material | Stainless Steel,Nickel Alloy,Carbon Steel |
Shape | Rectangle |
Type | Nickel Plate |
Resistance | 30 Ohm |
Elongation | 30 % |
Density | 8.1 g/cm cube |
Melting point | 1370 - 1400 C |
Tensile strength | 550 MPA |
ASTM B424 is a specification established by the American Society for Testing and Materials (ASTM) that covers nickel-iron-chromium-molybdenum-copper alloy (UNS N08825), nickel-chromium-molybdenum-columbium alloy (UNS N06625), nickel-chromium-molybdenum-silicon alloy (UNS N06219), and nickel-chromium-molybdenum-tungsten alloy (UNS N06686) plates for general corrosion-resistant and heat-resistant applications.
These alloys are commonly referred to as Incoloy alloys and are used in various industries, including chemical processing, petrochemical, power generation, and marine applications, where they exhibit excellent resistance to corrosion, oxidation, and high-temperature environments.
The ASTM B424 specification covers plates made from these nickel alloys in various sizes, thicknesses, and conditions (e.g., annealed, solution annealed, or cold worked). The standard outlines the chemical composition, mechanical properties, dimensions, tolerances, testing requirements, and other technical specifications for these plates.
Some common grades covered under ASTM B424 include:
Alloy 825 (UNS N08825): This nickel-iron-chromium alloy offers exceptional resistance to a wide range of corrosive environments, including acids, alkalis, and chloride-containing solutions.
Alloy 625 (UNS N06625): This nickel-chromium-molybdenum alloy exhibits high strength and excellent resistance to pitting, crevice corrosion, and intergranular corrosion in various corrosive environments.
Alloy 686 (UNS N06686): This nickel-chromium-molybdenum-tungsten alloy provides excellent resistance to corrosion, including acids, seawater, and oxidizing and reducing media.
Alloy 622 (UNS N06219): This nickel-chromium-molybdenum-silicon alloy offers superior resistance to a wide range of aggressive chemical environments, including hot sulfuric acid.
When utilizing ASTM B424 nickel alloy plates, it is essential to adhere to the specifications outlined in the standard to ensure proper material selection and performance in your application. Working with reputable manufacturers or suppliers who can provide plates that meet the necessary ASTM specifications and quality standards is recommended.
It is also advisable to consult the specific ASTM B424 standard for detailed information regarding the applicable grades, dimensions, mechanical properties, and other requirements for the nickel alloy plates you require.
View Complete details
Product Brochure
Length | 1-7 mtr |
Thickness | 2 mm - 40 mm |
Width | 500 - 2000 mm |
Standard | ASTM B333 ALLOY N10001 ASTM B333 ALLOY N10665 ASTM B333 ALLOY N10675 ASTM B333 ALLOY N10629 |
Application | Chemical Industry, Medical industry, etc |
Grade | Nickel Base Alloy |
Plate | 3.0 ~ 60.0 mm |
ASTM B333 is a standard specification issued by ASTM International that covers nickel-molybdenum alloy plates. This specification specifically pertains to plates made from nickel-molybdenum alloys such as Alloy B-2 and Alloy B-3.
Here are some key features and requirements of ASTM B333 nickel alloy plates:
Material: ASTM B333 covers plates made from nickel-molybdenum alloys, primarily Alloy B-2 and Alloy B-3. These alloys are known for their exceptional resistance to reducing media, such as hydrochloric acid, sulfuric acid, and phosphoric acid, as well as resistance to pitting, crevice corrosion, and stress corrosion cracking.
Manufacturing Process: Nickel alloy plates covered by ASTM B333 can be produced using various manufacturing methods, including hot or cold rolling, annealing, and quenching. The plates are typically supplied in the annealed condition.
Dimensions: ASTM B333 specifies the dimensions and tolerances for nickel alloy plates. This includes requirements for thickness, width, length, flatness, and other dimensional characteristics to ensure compliance with the specified standards.
Mechanical Properties: ASTM B333 provides guidelines for the mechanical properties of nickel alloy plates. These properties include tensile strength, yield strength, elongation, and hardness. The mechanical properties may vary depending on the specific alloy and heat treatment.
Testing and Certification: ASTM B333 requires certain tests to be performed on the nickel alloy plates to ensure their quality and conformance to the standard. These tests may include chemical analysis, mechanical testing, and non-destructive testing. The plates should be certified by the manufacturer to demonstrate compliance with the specified requirements.
It's important to note that ASTM B333 specifically focuses on nickel-molybdenum alloy plates and does not cover other types of nickel alloys. If you have specific requirements for other nickel alloys or different specifications, it is advisable to consult relevant ASTM standards or consult with manufacturers or suppliers who can provide further guidance based on your specific needs.
View Complete details
Product Brochure
Elongation | 40% |
Thickness | 1~30 mm |
Connection | Seamless |
Melting point | 1290 C -1350 C |
Standard | ASTM DIN JIS |
Density | 8.44 g/cm3 |
Length | 6000 mm |
Used | Chemical process industry and contact with sea water and bear high mechanical stress |
Grade | Monel 400, Monel 500 etc |
ASTM B434 is a standard specification established by the American Society for Testing and Materials (ASTM) for nickel-molybdenum-chromium-iron alloys (UNS N10003, N10242, N10665, N12160, and N10675) in plate form. These alloys are commonly known as Hastelloy B-2, Hastelloy B-3, Hastelloy C-4, Hastelloy C-276, and Hastelloy G-3.
ASTM B434 covers requirements for nickel alloy plates in various dimensions, including thickness, width, and length. The plates are intended for use in general corrosive service, such as chemical processing environments, where resistance to corrosion and stress corrosion cracking is essential.
The standard specifies the chemical composition, mechanical properties, heat treatment, and other requirements for the manufacturing of nickel alloy plates. It also includes guidelines for testing methods, such as tension testing, hardness testing, and nondestructive examination.
If you are considering using nickel alloy plates for a specific application, it is recommended to refer to the ASTM B434 specification for detailed information on the specific alloy grade you are interested in. This will ensure that the plates meet the necessary requirements for your intended use.
View Complete details
Product Brochure
Surface | Anodized |
Thickness | 1 mm - 100 mm |
Ultimate Strength | Greater than 350 MPa |
Elongation | Greater than 38 % |
Technics | Hot or cold rolling or annealed |
Grade | Nickel(UNS N02200),Nickel(UNS N02201),N4,N6,etc. |
Application | Oil, electrical, industry,etc. |
ASTM B127 is a standard specification issued by ASTM International that covers nickel-copper alloy plates. This specification specifically pertains to plates made from nickel-copper alloys such as Alloy 400 (Monel 400) and Alloy R-405.
Here are some key features and requirements of ASTM B127 nickel alloy plates:
Material: ASTM B127 covers plates made from nickel-copper alloys, primarily Alloy 400 (Monel 400) and Alloy R-405. These alloys are known for their excellent corrosion resistance in various environments, high strength, and good ductility.
Manufacturing Process: Nickel alloy plates covered by ASTM B127 can be produced using different manufacturing methods, including hot or cold rolling, annealing, and quenching. The plates are typically supplied in the annealed condition.
Dimensions: ASTM B127 specifies the dimensions and tolerances for nickel alloy plates. This includes requirements for thickness, width, length, flatness, and other dimensional characteristics to ensure compliance with the specified standards.
Mechanical Properties: ASTM B127 provides guidelines for the mechanical properties of nickel alloy plates. These properties include tensile strength, yield strength, elongation, and hardness. The mechanical properties may vary depending on the specific alloy and heat treatment.
Testing and Certification: ASTM B127 requires certain tests to be performed on the nickel alloy plates to ensure their quality and conformance to the standard. These tests may include chemical analysis, mechanical testing, and non-destructive testing. The plates should be certified by the manufacturer to demonstrate compliance with the specified requirements.
It's important to note that ASTM B127 specifically focuses on nickel-copper alloy plates and does not cover other types of nickel alloys. If you have specific requirements for other nickel alloys or different specifications, it is advisable to consult relevant ASTM standards or consult with manufacturers or suppliers who can provide further guidance based on your specific needs.
View Complete details
Product Brochure
Material | Alloy Steel |
Surface Treatment | Coated |
Type | Plate |
Application | Industry heating elements,home appliances |
Grade | ASTM B168 |
Surface | Anodized |
Density | 8.1g/cm3 |
Ultimate Strength | 550 MPA |
Technique | Cold rolled, Hot rolled |
Elongation | 30 % |
View Complete details
Product Brochure
Application | Medical, marine engineering etc |
Standard | ASTM B162 |
Processing | Rolling |
Elongation | 40% |
Ultimate Strength | 380 MPA |
Thickness | 0.1 - 60 mm |
Width | 10 - 680 mm |
Length | 2m, 2.44m, 3m, etc |
Surface | Mill,brush,polished,bright,hair line,sand blast,etc |
ASTM B162 is a standard specification issued by ASTM International that covers nickel plate, sheet, and strip. This specification specifically pertains to nickel and nickel alloy plates, sheets, and strips.
Here are some key features and requirements of ASTM B162 nickel sheets:
Material: ASTM B162 covers plates, sheets, and strips made from nickel and nickel alloys. It includes various grades such as Nickel 200 (UNS N02200), Nickel 201 (UNS N02201), and nickel alloy grades like Alloy 400 (Monel 400) and Alloy 600 (Inconel 600).
Manufacturing Process: Nickel sheets covered by ASTM B162 can be produced using various manufacturing methods, including hot or cold rolling, annealing, and other forming operations. The sheets are typically supplied in the annealed condition.
Dimensions: ASTM B162 specifies the dimensions and tolerances for nickel sheets. This includes requirements for thickness, width, length, flatness, and other dimensional characteristics to ensure compliance with the specified standards.
Mechanical Properties: ASTM B162 provides guidelines for the mechanical properties of nickel sheets. These properties include tensile strength, yield strength, elongation, and hardness. The mechanical properties may vary depending on the specific grade and heat treatment.
Testing and Certification: ASTM B162 requires certain tests to be performed on the nickel sheets to ensure their quality and conformance to the standard. These tests may include chemical analysis, mechanical testing, and non-destructive testing. The sheets should be certified by the manufacturer to demonstrate compliance with the specified requirements.
It's important to note that ASTM B162 covers a wide range of nickel alloys and their corresponding sheets. The specific requirements and properties can vary depending on the grade and alloy specified. If you have specific requirements for nickel sheets, it is advisable to consult relevant ASTM standards or consult with manufacturers or suppliers who can provide further guidance based on your specific needs and the desired nickel alloy.
View Complete details
Product Brochure
Material | Nickel, Alloy |
Application | Chemical field and petrefaction field |
Yield strength | 283 MPA |
Standard | ASTM b 575 alloy n06035 ASTM b 575 alloy n10276 ASTM b 575 alloy n06022 ASTM b 575 alloy n0645 |
Type | Plates |
Thickness | 0.5 mm~60 mm |
Elongation | 45 % |
Length | Upto 6000 mm |
Technique | Cold rolled, Hot rolled |
Ultimate Strength | 690 MPA |
View Complete details